Electrostatic powder coating oven

  • All types of minerals (iron - aluminum - copper - lead - ... etc), as well as all shapes produced from sheet or metal objects, whatever the thickness of the hull and the size of the workpiece.
  • All available colors according to the international ral of the largest international companies producing powder paint of the finest brands.
  • Paint a layer of zinc-rich (if necessary) before final paint to withstand extreme weather and extreme humidity.
  • Line for alumetal sticks and chemotherapy required for them before painting.


Zinc Paint, Rich Electrostatic Furnace

Iron products paint (Handler balconies - gates - tanks - pergolas - ....) with a primary paint layer as a liner before the final paint for more protection from the very humid weather elements. Then the final paint layer of the electrostatic powder against outdoor weather.

  • Electrostatic powder coating, anti-bacterial, used in painting hospital beds, etc. ...
  • Electrostatic powder paint that is resistant to sunlight and acid, and is used in the coating of alumetal sticks and products exposed to sunlight, as their color does not change with time.


  • The paint work is done using electrostatic powder according to the colors of RAL, which are manufactured in companies that all have QUALICOAT.
  • Artifacts are then entered into an oven to complete the ripening of the used powders.
  • To ensure perfect maturity, the temperature distribution inside the oven is measured periodically using the OVEN CURVE THERMOGRAPH and its compatibility with the DATA SHEETS of the powders.
  • Artifacts are inspected after each stage of treatment and spraying by a group of skilled and experienced technicians.
  • The thickness of the paint layer is measured over the artifacts after leaving the oven to ensure that it has obtained the required thickness (60-90) microns according to the specifications of QUALICOAT
  • The XYLENE TEST ripening test is performed periodically on the surface of the workpieces after they leave the oven to ensure complete ripening of the powders over the works in the oven.
  • All of this is in contrast to the VISUAL CHECK procedure of workpieces after they leave the oven to ensure they are defective.
  • Defective articles, if any, shall be separated and removed STRIPPING, using the appropriate chemicals for each material, and reprocessed and sprayed again.
  • After the inspection of the work done, it is well wrapped using the STRETCH FILM to ensure it is not affected during the transportation and loading.